|
|
|
QuickTrac
Schedule Inspections
Call 443-984-2776. Press [1] then...
A) Enter permit type
 Press [1] to enter a permit number
Press [2] to enter a postcard number
If you pressed [1] to enter a permit number:
Press [1] for COM permits (Combination)
Press [2] for BLD permits (Building)
Press [3] for ELE permits (Electrical)
Press [4] for MEC permits (Mechanical)
Press [5] for PLM permits (Plumbing)
Press [6] for DEM permits (Demolition)
If you pressed [2] you will automatically be taken
to the next step.
B) Enter permit number (begin with year)
The system will read back the address associated with the permit or postcard entered. If you did not find the permit you were looking for, press the [#] key. Otherwise, continue.
C) Enter four-digit inspection code
Refer to the inspection code list for a list of four-digit codes. Enter the code at any time. Or, press [*] for a spoken list of codes.
D) Select date for inspection
The system will allow you to schedule the inspection up to five days in advance.
The cut-off time for scheduling an inspection is 2:30 p.m. the day prior to the date requested.
After selecting a date, you may:
Press [1] to leave a message for the inspector
Press [2] to continue without leaving a message
Press [#] to select a different inspection date
After scheduling the inspection, you may:
Press [1] to hear your confi rmation number and end the call
Press [2] to schedule another inspection on the same permit
Press [3] to schedule an inspection on a different permit
Press [4] to return to the main menu
Please save your confirmation number for future reference. |
See the list of four-digit inspection codes.
|
|
 Back to the QuickTrac main page.
|
|
|
